How to Change charging Connector for Huawei Y6 2019
Change Charging Connector for Huawei Y6 2019
Your life is interrupted by facing charging problems. It will irritate you at the highest level. The user has tried dozens of Micro USB cables and the problem persists. The Huawei Y6 2019 charging problem. It either detects your load or backs up the data. The main concern is that you cannot charge your smartphone.
The guide will explain how to replace the fault Huawei Y6 2019 charging connector. All the steps are explained with details to accompany you during your smartphone repair
Before starting a repairing of Huawei Y6 2019 charging port. We highly recommended you make a full backup of the data as a precaution.
- If your USB port is fully damaged or clogged because of some problems.
- Huawei charger is not recognized.
- Huawei charging could not detect.
- Huawei Y6 is not able to recognize when it is connected to the computer.
- Facing the charging issues.
Turn off Your Smartphone:
Before fixing the problems of the Huawei Y6 2019 charging connector, you must switch off your smartphone because of security reasons.
You press the On/off button on the right side for a few seconds
Insert the Extraction Tool:
You can insert an extraction tool in the tool kit and make a small hole in the Sim Drawer on the left edge.
Just put a small pressure and the Sim Tray eject itself. So, you can easily remove it.
Extract the SIM & SD card:
Now you can extract SIM and SD cards in less than two minutes.
Gently slide the spatula between the top and bottom of the screen to give leverage and create a slight gap for opening.
Unclip Both Sides:
Continue to unclip both sides from the front and backside shell. The backside is firmly clipped. Do it gradually.